Modtub logo
Modtub logo

All articles

Leaking

Leak at the drain plug

If you're experiencing a leak at the drain plug, here is an effective method to resolve it:.

Leak at chiller fittings

If you notice a leak at any of the chiller fittings, it's probable that they require rethreading or haven't been adequately tightened. To ensure proper fitting, I recommend referencing this video tutorial to verify their correct installation. TIP: At

Leak at filter housing

If you notice a leak coming from your filter housing, it's highly probable that the O-ring, which should be securely positioned at the top of the filter housing, has become dislodged. If you've lost your O-ring, you can order a replacement using this

Leak at the pump

If you're experiencing leaks from your pump, start by determining the location of the leak. This will help us find a resolution. If it's coming from either of the two hose connection points, inspect to ensure that the O-rings are properly seated. Mis

Leak under chiller

If you spot water leaking from beneath the chiller, there's no need to worry! It's likely not a leak within the chiller itself. If it is a small amount of water, it is likely just condensation. If you believe that it's more water than what condensati

Leak at bulkhead

In the event of a leak at the bulkhead, there are two potential causes and corresponding solutions for addressing this issue:. Tightening the Bulkhead with Channel Locks:. Hand Tightening the Bulkhead:. If you've attempted both methods above, and the