Home

FAQs

Blog

Shop Accessories 

Shop the Modtub 

Modtub

What's Included

Safety Precautions

Modtub Set Up

Hygger Pump

Danner Pump

Ambohr Pump

Set Up Your Modtub

Filter Change

Water Sanitation Practices

Draining the Refilling the Tub

Deep Cleaning Your Modtub

Cleaning Chiller Air Filter Panels

Freezing and Winter Weather

Maintenance

No water flowing through return jet

My chiller is not cooling

My unit lost power/shut off

My chiller fittings won't go all the way down

Bulkhead seems too high on tub and hose 4 is leaking

Pump Humming or Running Intermittently

Find the Location of Leak (START HERE)

Leak at the drain plug

Leak at chiller fittings

Leak at filter housing

Leak at the pump

Leak under chiller

Leak at bulkhead

Leaking

My pump is noisy and not moving water

Danner Pump Troubleshooting

Troubleshooting Issues

Draining your tub

Add the chiller by pass hose

Re-attach Feet on Tub

Remove the lid

Water Shutoff Points

Remove and Replace Bulkhead

Remove and Open the Pump

Properly Seat and Tighten Chiller Fittings

DIY hose & housing insulation

How to

Can I keep it outdoors?

Can I install an ozone generator?

Will the 1/4 HP chiller be able to keep up in hot climates?

Will I fit in the Modtub?

Do you have a military discount?

How cold does the water get?

What are the dimensions of the tub?

How much energy does the Modtub use?

I'm leaving town.. What should I do with my tub?!

Is there a warranty?

Should I add ice to the Modtub?

How does delivery work and do you offer local pickup?

How fast does the water cool down on initial fill up?

Do you do custom modifications or sell only part of your set up?

Can I return my tub for a refund?

F and P Values on your pump controller (hygger model)

Understanding Condensation on Your Modtub

Modtub 1.0

Modtub 2.0 Set Up

Quick Start Guide

Set Up Your Modtub 2.0

My unit lost power/shut off and GFCI is tripping

Bulkhead seems off center on tub and hose 4 is leaking

Filter top cap cracked when removing the filter?

Why does my tub lid have a gap? Will it still seal?

Pump Troubleshooting

Troubleshooting

Drain your tub

Set Up JED 303 Ozone Generator

Tub Only - Removing Unions to access 3/4" female NPT

How To

Can I keep my Modtub outdoors?

What is the temperature range on the chiller?

I'm leaving town.. What should I do with my tub?

How does delivery work?

If I use an ozone generator, do I need to add extra chemicals?

I already have a chiller. Can I purchase everything minus the chiller?

Modtub 2.0

If you have our original Modtub, click here for all relevant help center articles!

If you have the Modtub 2.0, click here for all relevant help center articles

All articles

Categories

Modtub 1.0

Modtub 2.0