What's IncludedUpdated 12 days ago

1. Tub

Tub - Holds the water and is what you will be plunging in

Vanity Cover - Covers and protects the components on the back of the tub and 

Inlet Screen - placed at the bottom inlet of the tub to catch hair and debris before entering the pump

2. Accessories Box

Filters (x2) – Removes dirt and debris from the water as it passes through 

Water Hose Filter– Connects to the water hose to filter the water coming into the tub when filling 

Bulkhead Plugs– Used to plug up the bulkheads if you need to stop water flow there for any reason (not used during normal operation)

Water hose drainage connector – Connects the return jet to a water hose for easy drainage

Bolts (x10) - used to mount the pump, vanity cover, filter housing, and power cord on the back of the tub

Hex L-Key - used to tighten the bolts for mounting the components on the back of the tub

GFCI Protected Power Cord - the pump and chiller plug into this power strip and the male end of this cord is what you plug into your power outlet to supply power to the unit

Power Cord Bracket - holds the power cord in place on the back of the tub

Pump Power Cord - this connects to the pump to supply it power and the male plug of this plugs into the GFCI power cord

3. Pump Box

Pump – Circulates water through the system allowing the water to filter and chill 

4. Filter Box

Filter Housing and Filter Wrench – Holds the filter in place while water passes through the filter 

5. Chiller Box

Chiller – Controls the temperature and cools the water down to the set temperature 

6. Hose Bag

Hose 1 – Connects the tub to the pump 

Hose 2 – Connects the pump to the filter 

Hose 3 – Connects the filter to the chiller 

Hose 4 – Connects the chiller back into the tub